 |
|
|
|
 |
Application Notes Field and Protection Equipment 1107 SSU installation in a PLP splice enclosure Describes the installation of Norscan's 1107 Splice Sensor Unit (SSU) in a Preformed Line Products (PLP) splice enclosure. 1107 SSU installation in a Raychem FOSC 100-D splice enclosure This practice provides a quick reference on how to prepare cable sheaths for monitoring using the Norscan Cable Management System. It is to be used in conjunction with the Raychem FOSC 100 D splice enclosure system practice provided by Raychem. 1107 SSU or 2230 STU installation using a SIECOR SCF-8C28-ORS canister splice enclosure Application Notes 2000 LPU board replacement in a 2000 Master Shelf How to replace the LPU board on the rear panel of the 2000 Master Shelf. 2701 & 2706 SGU installation using an AT&T, Raychem or Stewing splice enclosure Application Notes 2706 SGU installation using an AT&T, Raychem or Stewing splice enclosure [Spanish] Application Notes 2708 SGU installation using an AT&T, Raychem or Stewing splice enclosure [Spanish] Application Notes 2730 SGU installation using a Raychem FOGK 100-SSB Describes the installation of a Norscan 2730 SGU using a Raychem torch-installed FOGK-SSB splice enclosure. The 2730 SGU can be installed onto the cable sheath with limited cable entry (no need to expose any optical fibers or buffer tubes). 2745 SGU and 1107C SSU installation using a Keptel LG-300 splice enclosure Application Notes 2745 SGU and 1107C SSU installation using a PLP Coyote splice enclosure Application Notes 2745 SGU and 1107C SSU installation using a Raychem FOSC 400-D5 splice enclosure Application Notes 2745 SGU installation using an AT&T, Raychem or Stewing splice enclosure Application Notes 2745 SGU, 2708 SGU, 1107 SSU installation using an AT&T 2600LG/SC1 Lightguide enclosure This practice explains how to retrofit the AT&T 2600LG/SC1 Lightguide Closure with the installation of Norscan's 2708 Sheath Grounding Unit (2708 SGU), 2745 Sheath Grounding Unit (2745 SGU) and 1107 Splice Sensor Unit (1107 SSU). 2745 WGU installation with NovoDetect Tracewire The 2745 Wire Grounding Unit connects two Tracewire lengths while giving access to them for testing and isolation purposes. It also provides the needed surge protection for the network and personnel. 2755 WGU installation with NovoDetect Tracewire The 2755 Wire Grounding Unit connects up to four Tracewire lengths while giving access to them for testing and isolation purposes. It also provides the needed surge protection for the network and personnel. 2920 LPU Installation and Replacement The 2920 LPU module is a sheath-grounding unit used to protect the office equipment from high current surges. This app note explains how to replace it in the field, thus eliminating the need to send it to Norscan for repair. Converting a TSU network to STU Describes the procedure of changing a monitoring network of TSU sensors to STU sensors. Electronically Programmable Sensors Describes the function and programming of all EP sensors. Induced AC filtering and surge protection - Issue 5 Describes different solutions to induced AC and voltage surge problems. Quick Disconnect from Lite Industries used with the Norscan 2745 SGU Describes the installation of quick disconnects on the 2745 SGU leads.
Office Equipment 2000 CMS Year 2000 Conformity - ACMS 2.x This document lists the tests performed on the 2000 Computer Control Unit (CCU) using ACMS 2.04 operating software. We have tested our 2000 CCU and found it to be Year 2K compliant when operated with ACMS release 2.04 or greater software. 2000 CMS Year 2000 Conformity - ACMS 2.x vs 1.13 This document compares the tests performed on the 2000 Computer Control Unit (CCU) using both ACMS 2.04 and 1.13 operating software. We have tested our 2000 CCU and found it to be Year 2K compliant when operated with ACMS release 2.04 or greater software. 2000 LPU board field replacement How to replace the Line Protection Unit (LPU) board on the rear panel of the 2000 Master Shelf (MS). 2000 Relay Interface Unit: 4200 CMS to RD LMS3 Describes how to use the 2000 RIU (2 & 4 line) to interface between the Norscan 4200 CMS and the Radiodetection LMS3. 4200 Cathodic Protection Theory Explains the theory behind cathodic protection and compares the 4200 and 2000 systems. 4200 CMS retrofit for P200 and P220 systems - Issue 4 How to replace an obsolete P200 or P220 system with a 4200 Cable Management System (CMS). 4200 CMS Terminal Server Connectivity Explains how to provide ethernet access to the 4200 CMS using a terminal server. 4200 CMS Year 2000 Conformity Norscan 4200 Cable Management System (CMS) Year 2000 Conformity 4200 CMS/MTM and Dynatel 2273 Application & Operation Describes the application and operation of the Norscan 4200 CMS/MTM and 3M Dynatel 2273 tone receiver. Norcomm 2 copy/paste in ACMS Lite Explains how to use the Norcomm 2 copy/paste command in ACMS Lite.
|
|
|||||||||||||
|
© 2007 Norscan Instruments Ltd. All Rights Reserved. | Our Privacy Policy |